 |
 |
Tasteless level Dearomatization solvent oil
ISO-L Specifications
| Item |
Limits |
Test
& Standard |
| Density
(15℃)Kg/m3 |
0.768 |
ASTM
D 4052 |
| Distillation
Range ℃ |
|
|
| Initial
boiling point ℃
50℅ |
?189
193 |
ASTM
D 86 |
| End
point ℃ |
?207 |
|
| Flash
point ℃ |
62 |
ASTM
D 56 |
| Viscosity@25
℃ |
2.00 |
ASTM
D 445 |
| Evaporation
Rate(n-BuAc=100) |
≯
10 |
ASTM
D 3539 |
| Aromatics
content Wt% |
≯
0.01 |
AM-S
140.31 |
|
KB Value
|
?27 |
ASTM
D 1133 |
| Sulfur
tenaion @ 25 ℃Mn/m |
24.5 |
ASTM
D 1331 |
| Colour
(Saybolt) |
+30 |
ASTM
D 156 |
| Aniline
Point |
84 |
ASTM
D 611 |
| Refractive
Lndex@20℃ |
1.426 |
ASTM
D 1218 |
| Ｂromine
index mg/100g |
≯5 |
ASTM
D 2710 |
| Sulphur
ppm |
≯5 |
|
| Benzene ppm |
≯10 |
|
|
Dearomatization
Solvent Oil
Specifications |
1.JLD-40
Dearomatization Solvent Oil(Alias D-40 Solvent Oil)--
Product Standard Q/SH1070 101-2003
|
Item |
Physical
and Chemical Properties |
Typical
Data |
Test
Method |
Distillation
Range ℃
IBP
EBP |
150 min
200 max
|
158
194
|
GB/T 6536-1997 |
Density(20℃),Kg/m3
|
770 ～ 805 |
785.3 |
GB/T 1884-2000
and GB/T 1885-1998 |
Kinematic
Viscosity,
(40 ℃), mm2/s |
1.1 ～ 1.6 |
1.23 |
GB/T 265-88 |
Flash
Point,℃ |
40min |
45 |
GB/T 261-83(91)
|
Color, Saybolt |
+28 min |
+30 |
GB/T 3555-92 |
Aromatic
Content,％(mass) |
0.5 max |
0.1 |
UOP495 and SH/T 0409-92
|
Bromine
Value , gBr/100g |
0.1 max |
0.05 |
GB/T 11135-89 |
Sulfur
Content, μ g/g |
5 max |
1 |
SH/T 0253-92 |
Water-soluble
Acid and Alkali |
nil |
nil |
GB/T 259-88 |
Mechanical
Impunities,％(mass) |
nil |
nil |
GB/T 511-88 |
Water％(mass) |
nil |
nil |
GB/T 260-77 ( 88
) |
Copper
Corrosion Test(50℃,3h) |
acceptable |
acceptable |
GB/T 378-64 ( 90
) |
KB
Value |
|
|
GB 11134 |
Aniline
Point, ℃ |
|
66 |
GB/T262 |
Product usage according
to its application: |
It is used as a kind
of substitute for cleaning agents for industrial application
that destroy the ozonosphere. It has strong detergent
capability, and is compatible with material and innocuous.
And it doesn’t contaminate the environment and destroy
the ozonosphere. It is also used as solvent for paints
and dyeing and printing auxiliaries.
|
Marking, packaging, storage,
transportation and acceptance check are to be performed
according to SH 0164.
Packed with oil tanker and metal barrel, etc.
|
|
| |
2.JLD-60 Dearomatization Solvent Oil (Alias
D-60 Solvent Oil )-- Product Standard Not Formulated |
Technical
Requirements and Test Method for JLD-60
Dearomatization Solvent Oil |
Item |
Physical
and Chemical Properties |
Typical
Data |
Test
Method |
Distillation range ℃
IBP
EBP |
180min
210max
|
190
205 |
GB/T 6536-1997 |
Density (20℃),Kg/m3
|
780～820 |
806.3 |
GB/T 1884-2000
and GB/T 1885-1998 |
Kinematic Viscosity
, (40 ℃), mm2/s |
1.1～1.6 |
1.6 |
GB/T 265-88 |
Flash Point, ℃ |
60min |
68 |
GB/T 261-83 ( 91
) |
Color, saybolt |
+28 min |
30 |
GB/T 3555-92 |
Aromatic Content
％(mass) |
0. 5 max |
0.2 |
UOP495 and SH/T 0409-92
|
Bromine Value,gBr/100g
|
0.1 max |
0.05 |
GB/T 11135-89 |
Sulfur Conyentμ
g/g |
5 max |
2 |
SH/T 0253-92 |
Water-soluble Acid and Alkali |
nil |
nil |
GB/T 259-88 |
Mechanical Impunities,％(mass)
|
nil |
nil |
GB/T 511-88 |
Water,％(mass
) |
nil |
nil |
GB/T 260-77 ( 88
) |
Copper Corrosion Test ,(50 ℃, 3h)
|
acceptable
acceptable |
acceptable |
GB/T 378-64 ( 90
) |
KB
Value |
|
|
GB 11134 |
Aniline Point,
℃ |
|
70 |
GB/T262 |
| Product usage according to its application: |
It is a kind of substitute
for cleaning agents for industrial application that destroy
the ozonosphere, with strong detergent capability, and
is compatible with material and innocuous. And it doesn’t
contaminate the environment and destroy the ozonosphere.
It is used as solvent for paints, dyeing and printing
auxiliary, aerosol insecticide and liquid mosquito-repellent
incense, and base oil for metal working fluid as well. |
Marking, packaging, storage,
transportation and acceptance check are to be performed
according to SH 0164.
Packed with oil tanker and metal barrel, etc. |
|
| |
3.JLD-70 Dearomatization Solvent Oil (Alias
D-70 Solvent Oil )-- Product Standard Q/SH1070 101-2003 |
Item |
Physical
and Chemical Properties |
Typical
Data |
Test
Method |
Distillation range ℃
IBP
EBP |
180 min
250 max
|
190
250
|
GB/T 6536-1997 |
Density (20℃),Kg/m3
|
780～830 |
80.8 |
GB/T 1884-2000
and GB/T 1885-1998 |
Kinematic Viscosity
, (40 ℃), mm2/s |
1.8～2.2 |
1.8 |
GB/T 265-88 |
Flash Point, ℃ |
80min |
65 |
GB/T 261-83 ( 91
) |
Color, saybolt |
+28 min |
30 |
GB/T 3555-92 |
Aromatic Content ％(mass) |
0.5 max |
0.1 |
UOP495 and SH/T 0409-92
|
Bromine Value, gBr/100g |
0.1 max |
0.05 |
GB/T 11135-89 |
Sulfur Conyent, μ g/g |
5 max |
2 |
SH/T 0253-92 |
Water-soluble Acid and Alkali |
nil |
nil |
GB/T 259-88 |
Mechanical Impunities, ％(mass) |
nil |
nil |
GB/T 511-88 |
Water, ％(mass) |
nil |
nil |
GB/T 260-77 ( 88
) |
Copper Corrosion Test , (50 ℃, 3h)
|
acceptable |
acceptable |
GB/T 378-64 ( 90
) |
KB Value |
|
|
GB 11134 |
Aniline Point, ℃ |
|
77 |
GB/T262 |
| Product usage according to its application: |
It is a kind of substitute
for cleaning agents for industrial application that destroy
the ozonosphere, with strong detergent capability, and
is compatible with material and innocuous. And it doesn’t
contaminate the environment and destroy the ozonosphere.
It is used as solvent for paints and dyeing and printing
auxiliary, etc., and base oil for metal working fluid
as well. |
Marking, packaging, storage,
transportation and acceptance check are to be performed
according to SH 0164.
Packed with oil tanker and metal barrel, etc. |
> 1. CAS Number
64742-48-9
> 2. KB Value
31
> 3. Aniline point (C) 77
> 4. Flash Point (C) >60
> 5. Specific Gravity 0.78-0.82
> 6. IBP
190
> 7. E.P.
250
> 8. % paraffinic
70-75, N-paraffin 5-8 , Iso-paraffin 65-70.
> 9. % Napthenic
30 |
|
| |
4.JLD-80 Dearomatization Solvent Oil (Alias
D-80 Solvent Oil )-- Product Standard Q/SH1070 101-2003 |
Item |
Physical
and Chemical Properties |
Typical
Data |
Test
Method |
Distillation range℃
IBP IBP
EBP EBP
|
195 min
280 max
|
205
260
|
GB/T 6536-1997 |
Density(20℃),Kg/m3
|
780～830 |
804.8 |
GB/T 1884-2000
and GB/T 1885-1998 |
Kinematic Viscosity,(40 ℃), mm2/s
|
1.8～2.2 |
2.0 |
GB/T 265-88 |
Flash Point,℃ |
80min |
80 |
GB/T 261-83 ( 91
) |
Color, saybolt |
+28 min |
30 |
GB/T 3555-92 |
Aromatic Content ％(mass ) |
0.5 max |
0.2 |
UOP495 and SH/T 0409-92
|
Bromine Value,gBr/100g |
0.1 max |
0.05 |
GB/T 11135-89 |
Sulfur Conyent,μ g/g |
5 max |
2 |
SH/T 0253-92 |
Water-soluble Acid and Alkali |
nil |
nil |
GB/T 259-88 |
Mechanical Impunities, ％(mass) |
nil |
nil |
GB/T 511-88 |
Water, ％(mass) |
nil |
nil |
GB/T 260-77 ( 88
) |
Copper Corrosion Test , ( 50 ℃, 3h
) |
acceptable |
acceptable |
GB/T 378-64 ( 90
) |
KB Value |
|
|
GB 11134 |
Aniline Point, ℃ |
|
|
GB/T262 |
| Product usage according to its application: |
It is a kind of substitute
for cleaning agents for industrial application that destroy
the ozonosphere, with strong detergent capability, and
is compatible with material and innocuous. And it doesn’t
contaminate the environment and destroy the ozonosphere.
It is used as solvent for paints and dyeing and printing
auxiliary, etc., and base oil for metal working fluid
as well. |
Marking, packaging, storage,
transportation and acceptance check are to be performed
according to SH 0164.
Packed with oil tanker and metal barrel, etc. |
|
| |
5.JLD-110 Dearomatization Solvent Oil (Alias
D-110 Solvent Oil )-- Product Standard Q/SH1070 101-2003 |
Item |
Physical
and Chemical Properties |
Typical
Data |
Test
Method |
Distillation range℃
IBP IBP
EBP EBP
|
250 min
360 max
|
250
300
|
GB/T 6536-1997 |
Density(20℃),Kg/m3
|
800～830 |
820.9 |
GB/T 1884-2000
and GB/T 1885-1998 |
Kinematic Viscosity,(40 ℃), mm2/s
|
4.0～4.5 |
4.524 |
GB/T 265-88 |
Flash Point,℃ |
110min |
110 |
GB/T 261-83 ( 91
) |
Color, saybolt |
+25 min |
25 |
GB/T 3555-92 |
Aromatic Content ％(mass ) |
0.8 max |
0.8 |
UOP495 and SH/T 0409-92
|
Bromine Value,gBr/100g |
0.1 max |
0.1 |
GB/T 11135-89 |
Sulfur Conyent,μ g/g |
5 max |
5 |
SH/T 0253-92 |
Water-soluble Acid and Alkali |
nil |
nil |
GB/T 259-88 |
Mechanical Impunities, ％(mass) |
nil |
nil |
GB/T 511-88 |
Water, ％(mass) |
nil |
nil |
GB/T 260-77 ( 88
) |
Copper Corrosion Test , ( 50 ℃, 3h
) |
acceptable |
acceptable |
GB/T 378-64 ( 90
) |
KB Value |
|
|
GB 11134 |
Aniline Point, ℃ |
|
77 |
GB/T262 |
| Product usage according to its application: |
It is a kind of substitute
for cleaning agents for industrial application that destroy
the ozonosphere, with strong detergent capability, and
is compatible with material and innocuous. And it doesn’t
contaminate the environment and destroy the ozonosphere.
It is used as solvent for paints and dyeing and printing
auxiliary, etc., and base oil for metal working fluid
as well. |
Marking, packaging, storage,
transportation and acceptance check are to be performed
according to SH 0164.
Packed with oil tanker and metal barrel, etc. |
Hydrocarbon Refrigerant specification R600a
Formula |
C4H10， |
Name of performance |
data |
Critical temperature°C |
135 |
Refrigerant content≥% |
99.3 |
Molecular weight in kg/kmol |
58.1 |
Organic impurities≤% |
0.5 |
Normal boiling point? in °C |
-11.6 |
Butadiene≤ppm |
3 |
Pressure at at -25°C in（MPa） |
0.058 |
Normal Hexane≤ppm |
20 |
Liquid density at -25°C? in（kg/l） |
0.59 |
Benzene≤ppm |
1 |
Vapour density at 25/+32 °C (kg/ m3 ) |
1.3 |
Sulfur ≤ ppm |
2 |
Volumetric capacity at -25/55/32°C (kJ/ m3 ) |
373 |
Temperature glide of evap ≤ °C |
1 |
Enthalpy of vaporization at -25°C （kJ/kg） |
3766 |
Non condensable gases ≤ % vol （of vapour phase） |
1.1 |
Pressure at +20°C in（MPa） |
0.31 |
Water ≤ ppm |
8 |
Auto lgnition Point °C |
460 |
Acid content ≤ mg KOH/g Neutralization |
0.02 |
Flammability Limit? % in air |
1.8-8.5 |
Evaporation residue ≤ ppm |
20 |
COP |
3.77 |
Particles/solids Visual check |
no |
Hydrocarbon Refrigerant specification R290a (HCR-22)
Formula |
C3H8? C4H10 |
Name of performance |
data |
Critical temperature °C |
96.7 |
Refrigerant content ≥ % |
99.5 |
Molecular weight in kg/kmol |
50.12 |
Organic impurities ≤ % |
0.5 |
Normal boiling point? in °C |
-38 |
Butadiene ≤ ppm |
3 |
Pressure at at -25°C in（MPa） |
0.203 |
Normal Hexane ≤ ppm |
20 |
Liquid density at -25°C in（kg/l） |
0.59 |
Benzene ≤ ppm |
1 |
Vapour density at 25/+32 °C (kg/ m3 ) |
3.8 |
Sulfur ≤ ppm |
2 |
Volumetric capacity at -25/55/32°C (kJ/ m3 ) |
1120 |
Temperature glide of evap ≤ °C |
4-6 |
Enthalpy of vaporization at -25°C （kJ/kg） |
406 |
Non condensable gases ≤ % vol （of vapour phase） |
1.5 |
Pressure?? at? +20°C? in（MPa） |
0.62 |
Water ≤ ppm |
10 |
|
|
Acid content ≤ mg KOH/g Neutralization |
0.02 |
|
|
Evaporation residue ≤ ppm |
20 |
COP |
3.52 |
Particles/solids Visual check |
no |
Hydrocarbon Refrigerant specification HCR-12
Formula |
C3H8
C4H10， |
Name of performance |
data |
Critical temperature °C |
115 |
Refrigerant content ≥ % |
99.85 |
Molecular weight? in kg/kmol |
52.1 |
Organic impurities ≤ % |
0.08 |
Normal boiling point in °C |
-35.6 |
Butadiene ≤ ppm |
3 |
Pressure at at -25°C in（MPa） |
0.095 |
Normal Hexane ≤ ppm |
20 |
Liquid density at -25°C? in（kg/l） |
0.58 |
Benzene ≤ ppm |
1 |
Vapour density? at 25/+32 °C (kg/ m3 ) |
1.2 |
Sulfur ≤ ppm |
2 |
Volumetric capacity at -25/55/32°C (kJ/ m3 ) |
373 |
Temperature glide of evap ≤ °C |
1 |
Enthalpy of vaporization at -25°C （kJ/kg） |
386 |
Non condensable gases ≤ % vol （of vapour phase） |
1.1 |
Pressure?? at? +20°C? in（MPa） |
0.31 |
Water ≤ ppm |
5 |
Auto lgnition Point? °C |
470 |
Acid content ≤ mg KOH/g Neutralization |
0.02 |
Flammability Limit? % in air |
1.8-8.5 |
Evaporation residue?? ≤?? ppm |
20 |
COP |
3.60 |
Particles/solids??? Visual check |
no |
Hydrocarbon Refrigerant specification (R290)
Formula |
C3H8 |
Name of performance |
data |
Critical temperature °C |
96.7 |
Refrigerant content ≥ % |
99.5 |
Molecular weight? in kg/kmol |
44.1 |
Organic impurities ≤ % |
0.5 |
Normal boiling point in °C |
-42.1 |
Butadiene ≤ ppm |
3 |
Pressure at at -25°C in（MPa） |
0.199 |
Normal Hexane ≤ ppm |
20 |
Liquid density at -25°C in（kg/l） |
0.56 |
Benzene ≤ ppm |
1 |
Vapour density at 25/+32 °C (kg/ m3 ) |
3.6 |
Sulfur ≤ ppm |
2 |
Volumetric capacity at -25/55/32°C (kJ/ m3 ) |
1164 |
Temperature glide of evap ≤ K |
0.5 |
Enthalpy of vaporization at -25°C （kJ/kg） |
406 |
Non condensable gases ≤ % vol （of vapour phase） |
1.5 |
Pressure?? at? +20°C? in（MPa） |
0.84 |
Water ≤ ppm |
10 |
Auto lgnition Point °C |
460 |
Acid content ≤ mg KOH/g Neutralization |
0.02 |
Flammability Limit % in air |
2.37-7.3 |
Evaporation residue ≤ ppm |
20 |
COP |
3.45 |
Particles/solids Visual check |
no |
|
| |
|
All
rights reserved:Nanjing Haoxinwei Technology and Trade Co., Ltd
Add:7-502
Siliyuan,Yintuo Garden,Xuanwu District,Nanjing
TEL：0086-25-85470506 FAX：0086-25-85475515
Http://www.nj-hxw.com Email:Feizhou@nj-hxw.com
|
|
|
